Home > > Industry News
  • Precautions for maintenance and use of polyether amine

    2022-11-11 15:02:16
    The construction process of polyether amine is very simple, as long as you master its operation steps, and then further improve it on this basis. The above introduction is expected to be helpful for your future use.
  • High molecular weight polymer surfactant

    2022-11-09 16:09:43
    In the treatment and recovery of ceramic industrial wastewater, such as slurry and glaze slurry wastewater, precipitators or flocculants are often added. Contrary to dispersant, it can promote the destabilization and aggregation of colloidal system, so as to improve the dehydration of mud and grouting efficiency.
  • What is the role of the development of environment-friendly surfactants?

    2022-11-07 14:41:53
    Before use, carefully check whether the power cord is connected and robust. The wire of the linear driver of the controller and the cigarette lighter cannot be placed on the lifting link and between the upper and lower bed frames. Frequently check to avoid power failure of the wire. In the process of application, people cannot jump on the bed surface.
  • Almost all types of organic ink pigments are treated with alkyl polyglycosides

    2022-11-04 16:29:57
    Alkyl polyglycosides contain two groups with opposite polarity or solubility. The polar part is a hydrophilic group, and the non-polar part is a hydrophobic or lipophilic group. Generally, it can be divided into non-ionic, anionic, cationic and zwitterionic types.
  • It is often necessary to modify magnesium hydroxide flame retardant in practical use

    2022-11-02 17:24:51
    When aluminum hydroxide is blended with rubber, it is difficult to form a good interface between the two, and a large amount of filling will inevitably cause great damage to the physical and mechanical properties of rubber. Li Juan et al. used ATH, chlorinated paraffins and Sb2O3 together. The inorganic flame retardant ATH can meet the higher flame retardant requirements without having to be filled with a very high fraction, and at the same time, it does not affect the physical and mechanical properties of rubber.
  • Some surfactants have good oxygenation

    2022-10-31 16:22:32
    Alkyl polyglycoside surfactant, synthesized from renewable natural fatty alcohol and glucose, is a new type of non-ionic surfactant with comprehensive performance. It has the characteristics of both common non-ionic and anionic surfactants, high surface activity, good ecological security and solubility, and is internationally recognized as the first choice of "green" functional surfactant.
  • The types and structures of surfactants and auxiliaries are closely related

    2022-10-28 16:46:27
    Defoaming effect can be divided into two types: foam breaking and foam inhibiting. The substance with foam breaking ability is called foam breaking agent. An effective defoamer should not only break the foam quickly, but also prevent the formation of foam for a long time.
  • Surfactants have excellent performance in decontamination

    2022-10-26 17:00:02
    Anionic surfactant has excellent performance in decontamination, but it is often used with non-ionic surfactant to obtain better deinking effect. Anionic surfactant has good foaming and degreasing properties, and non-ionic surfactant presents non-ionic state in aqueous solution with high stability. When nonionic surfactant and anionic surfactant are used together, the colloidal particles will be negatively charged and repel each other with the same charge, forming a stable dispersion system, which is conducive to the separation and removal of ink and fiber.
  • After adding surfactant to the aquaculture water

    2022-10-24 16:47:36
    Oxygen increasing principle of surfactant: after adding surfactant in aquaculture water, the saturation solubility of oxygen in aquaculture water can be increased. According to the hydrate formation theory and the double membrane theory, since the solubility of oxygen in water is very small, the water oxygen compound in water generally first forms at the gas-liquid interface, and then slowly diffuses from the gas phase to the liquid phase. In the water body containing surfactant, due to the solubilization of the surfactant, a large amount of oxygen is dissolved in the surfactant micelle formed in the aqueous solution.
  • Application principle of surfactant in water-based metal cleaning agent

    2022-10-21 16:53:56
    The application principle of surfactant in water-based metal cleaning agent is to weaken or offset the adhesion of oil stain on metal surface through the properties of surfactant such as wetting, penetration, emulsification, dispersion and solubilization, and accelerate the oil stain to leave the metal surface by mechanical and physical methods and enter the washing solution to be emulsified, dispersed and suspended or solubilized in micelles.
  • Surfactants are those with fixed hydrophilic and lipophilic groups

    2022-10-19 16:30:16
    Emulsifier is a kind of surfactant. Surfactants have the function of emulsification and others. The main function of surfactant is to remove stains, emulsification, solubilization, suspension aid, foaming and defoaming, sterilization, etc.
  • What are the functions of emulsions prepared from surfactants?

    2022-10-17 11:30:32
    Surfactant is used as the cleaning agent in the cleaning solution to reduce the interfacial tension between the cleaning solution and the dirt. The cleaning solution can first wet the dirt surface to make the dirt swell, and then penetrate into the dirt to disperse the dirt.
  • Small interaction between surfactant and rock surface

    2022-10-14 11:29:15
    At present, chemical flooding is the main method of tertiary oil recovery in China. Surfactants are suitable for chemical flooding. On the basis of practical work experience, many experts and scholars have put forward requirements for surfactant for oil field flooding, which are summarized as follows
  • Surfactant is used as cleaning agent in cleaning solution

    2022-10-12 20:40:34
    The application principle of surfactant in water-based metal cleaning agent is to weaken or offset the adhesion of oil stain on metal surface through the properties of surfactant such as wetting, penetration, emulsification, dispersion and solubilization, and accelerate the oil stain to leave the metal surface by mechanical and physical methods and enter the washing solution to be emulsified, dispersed and suspended or solubilized in micelles.
  • Strong ability to produce surfactant for pesticide

    2022-10-10 16:17:31
    Another important property of surfactants is that they can spontaneously form micelles in aqueous solutions. With the increase of surfactant concentration, the micelles increased, and the shape of micelles changed from spherical, rod to layered. The micellar core formed in the aqueous solution of surfactant molecules creates a hydrophobic micro space, which can dissolve hydrophobic drug liquids or solutions in it. Therefore, the formation of micelles is of great significance for pesticide formulation processing.  
  • Alkyl polyglycosides have the characteristics of both common non-ionic and anionic surfactants

    2022-10-08 10:18:10
    The alkyl polyglycosides combined with lysozyme action system can significantly improve the sludge hydrolysis effect. With the increasing dosage of alkyl polyglycosides, the sludge hydrolysis effect will also be enhanced. When the dosage of alkyl polyglycosides is 0.3 g/gDS, the hydrolysis and sludge reduction effect is the best. After comprehensive consideration, the optimal dosage is determined to be 0.3 g/gDS.
  • Reaction under the action of alkyl polyglycosides alone

    2022-09-30 09:17:56
    Under the action of alkyl polyglycosides alone, the concentration of polysaccharide dissolved from the sludge increased sharply 2 hours before the reaction, the increase of polysaccharide content slowed down gradually 2 to 4 hours, the concentration of polysaccharide gradually decreased 4 to 24 hours later, and the concentration of polysaccharide in the sludge gradually became stable.
  • Surfactants have different adsorption mechanisms on particle surfaces

    2022-09-28 16:28:22
    Most of the grinding aids used in my country's ceramic industry are relatively expensive and have a single performance. Most of the ceramic grinding aids used are still produced from industrial raw materials, resulting in high prices and difficult for users to accept. Coupled with the shortage of sources, most of them are Petroleum or coal chemical products, so it is difficult to popularize and apply.
  • Comparison of Novel Gemini Surfactants and Biosurfactants

    2022-09-26 15:26:15
    Scholars at home and abroad have carried out a lot of meaningful research and exploration on the remediation of PAH-contaminated soil by surfactants. However, the existing research mainly focuses on traditional surfactants, and traditional surfactants often have problems such as toxicity, secondary pollution, and high price. Therefore, finding economical, effective and environmentally friendly new surfactants will become the future application of surfactant repair. Research hotspots and key points of PAH-contaminated soils.
  • What are the necessary requirements for cosmetic surfactants?

    2022-09-23 16:12:33
    If the formulation design of cosmetics is flawed, it may cause abnormal skin reactions during use, which in turn may affect people's mood or health to some extent. Therefore, the raw materials for the production of cosmetics cannot have immune rejection reactions with the human body, that is, they must be non-irritating and non-toxic to the skin, hair, eye mask, etc., and have good appearance, skin feel, and good spreadability and stretchability.
Altogether 653 article, Every page shows:20 article